The Quiet Craft of Khmer Bronze Casting: A Morning in Tani Village

21 November 2026

A different kind of workshop

Just south of Siem Reap, past the last of the guesthouses and before the rice fields open up, Tani village is a place where the ring of hammers carries across the lanes. We came here to see bronze casting, a craft that has been passed down through families in this area for generations. The work is slow, hot and precise, and watching it is a lesson in patience.

Wax, clay and fire

We arrived mid-morning, when the light in the open-sided workshops is good and the day is not yet too hot. The first stage is wax. Craftsmen shape the wax into the form of a Buddha or a traditional figure, working with small wooden tools. The detail is fine: the curve of a robe, the line of a hand. Each wax model is then coated in layers of clay, left to dry, and fired. The wax melts away, leaving a hollow clay mould. Molten bronze is poured into that mould, and the clay is broken off once the metal has cooled. What emerges is a rough figure that will be filed, sanded and polished by hand until it gleams.

The smell in the workshop is a mix of beeswax, clay dust and the sharp tang of hot metal. The heat from the furnace is intense, and the craftsmen work in short bursts, wiping their faces with cloths. We watched a man tap a chisel along the edge of a bronze arm, the sound small and steady. Nobody seemed to mind us standing quietly at the edge of the work area.

What you will see

Tani is not a formal tourist site. There is no visitor centre and no set route. Several families work in the same lane, and if you walk slowly you will see different stages of the process: wax carving in one workshop, clay moulds drying in the sun in another, and finished pieces lined up on a table. The figures range from small hand-sized pieces to larger statues. We were told that some of the work is commissioned by temples and monasteries, and some is sold to visitors. If you are interested in buying, ask about the piece and how it was made. Prices vary, so ask your host or the craftsman directly rather than assuming.

Getting there

Tani village is a short drive south of Siem Reap town, roughly 15 to 20 minutes by tuk-tuk depending on traffic. We arranged a tuk-tuk through our guesthouse and asked the driver to wait, since the village is not on a main road and it is easier to have transport arranged for the return. The lanes are narrow and dusty, so a tuk-tuk or moto is more practical than a car. If you are cycling, the route is flat but the road surface can be uneven. Ask your driver to take you to the bronze casting workshops in Tani; they will know the area. There is no entrance fee for walking around the workshops, but it is polite to ask before taking photographs of people at work.

Good to know

  • Best time to visit is mid-morning on a weekday, when most workshops are active and the heat is still manageable.
  • Bring water and wear shoes you do not mind getting dusty; the lanes are unpaved.
  • Ask before photographing craftsmen at work, and avoid interrupting anyone near the furnace.
  • If you want to buy a piece, ask the craftsman or your host about the price and how it was made rather than relying on a fixed rate.

Planning time in Siem Reap? Melbourne Residence is a quiet residential community of homes near Angkor Wat — explore the neighbourhood.

TaNi AngKor Chey District, KamPot Province, The Real Life of Cambodia, 4K

Back to blog